Undercar
-
Coming soon
#9409A - Hose Clamp Pliers
• Re-engineered double gear lock lever with wider and deeper gears for secure locking.
• Enhanced cable assembly with larger cable and stronger connection for maximum strength.
• A New Cable adjuster and multiple gear lock provide accurate and secure locking for any clamp position between the minimum and maximum range
• Allows for removal of plastic and/or metal self-tightening hose clamps with diameters of 11/16″ – 2-1/2″ (18mm – 54mm)
• Precision clamp on the end of flexible cable allows for extended reach where other models cannot reach
• Pliers can be locked, freeing up your hands and making your job easier and faster- NT$0/PCS
-
Coming soon
#78585 - Universal Radiator Pressure Tester & Vacuum Type Cooling System Kit
•Allows easy testing for leakage in radiator system and quick change of coolant.
•Unit is suitable for domestic and import vehicles.
•Color coded radiator test cap makes it easy to choose the suitable test cap for the job.
•Special design of vacuum purge & refill tool connection fits nearly all type of radiator openings.
•Set includes:
– 1pc Gauge : Test Range 0 ~ 2.5 bar.
– 1pc Blue Test Adapter and 1pc Black Test Adapter to test original cap leakage
– 16 pieces Radiator Tester Caps
– Radiator Purge and Refill Tool
• Applications: Mercedes Benz, GM, Jeep, Peugeot, Subaru, Chrysler, Acura, Mitsubishi, Nissan, Mazda, Toyota, Infiniti, Geo, Suzuki, Isuzu, Honda, Lexus, Volvo, Saab, Citroen, Renault, Fiat, Alfa, Mini Cooper, VW, BMW, Ford, Opel, Porsche. Audi, etc.- NT$0/SET
-
Coming soon
#7865 - Ball Joint Service Tool With 4-Wheel Drive Adapters
• This heavy duty tool set is excellent for removal and installation of press-fit parts such as ball joints, universal joint and truck brake anchor pins
• It will remove even rusted and corroded parts
• Set contains C-frame press, 3 receiver tubes sizes: 2-3/4″x3″, 2-1/4″x 2-1/2″ & 1-3/4″x2″, installation and removing adapters
• Set also includes 4-wheel drive ball joint service kit that allows service for 1967 thru current 1/2 and 3/4 ton 4WD vehicles having the Dana 44 front axle (found on Ford, GM, Dodge, IHC and Jeep vehicles)
• Blow molded case for easy storage and transport- NT$0/SET
-
Coming soon
#78810 - 10pc Torque Limiting Extension Set
- Accurately torque wheel nuts to recommended torque
- Increase efficiency and eliminate damage caused by impact wrenches
- No maintenance or calibration necessary
- Color coded • Matt finish
- Made of Cr-Mo (Chrome molybdenum)
- NT$0/SET
-
Coming soon
#78830UG - Hub/ Wheel Bearing Service Set
- For removing and installing hubs, wheel bearings and bearing races while still mounted on the vehicle, saving time and avoiding the need for alignment
- Adjustable puller bar jaws and included caliper bridge bar allow for fitting most hub applications
- Large Grade 8, 7/8" thread, 1-1/4" drive main drive screw for superior durability
- NT$0/SET
-
Coming soon
*3018 - 3.5" Digital Tire Inflator with Hose
- New dual AAA battery powered design. 4X the battery life and simplified battery installation.
- New 21” Stainless braided hose for increased durability
- Maximum accuracy and 0.1psi resolution for use with TPMS (Tire Pressure Monitoring System)
- Displays KG, PSI or BAR measurement
- Large face backlit LCD digital read-out
- Unit covered with rubber sleeve for extra comfort and durability
- Two position lever. 1st position deflates, 2nd position inflates.
- Easy Change Chuck System
- Works with nitrogen systems and CO₂
Click Here to Download: Parts Breakdown- NT$0/PCS
-
Coming soon
NEW #78139 - Drive Axle/ Axle nut service kit
• This kit provides total solutions for the drive axle and staked axle nut.
• Deep impact axle nut socket made by CR-MO steel, 1/2" Dr. 12 point.
• Stud cleaning tool and hub cleaning tool that drives by impact wrench can remove dirt and rust on the drive axle and hub easily.
• Special designed staked axle nut punch provides an easy and fast way to both unstake and stake axle nuts.
- NT$0/SET
-
Coming soon
NEW #78128A - Wheel Service Kit
• This kit provides total solutions for wheel studs.
• Flip socket with impact extension bar can easily loosen and tighten wheel nuts wheel studs.
• Stud cleaning tool and hub cleaning tool that drive by impact wrench can remove dirt and rust on wheel studs and hub easily.
• Wheel stud installer pulls new wheel stud into position within seconds. Bearing designed prevents potential damage or wheel nuts.
- NT$0/SET
-
Coming soon
#FS60C - Handheld Digital Tire Inflator (Ceramic Sensor)
• ABS housing+TPE, Comfortable, ergonomic molded pistol grip handle.
• Supplied with official calibration certificate
• Ideal for tyre fitters
• Auto-on when the pressure sensed, auto-off after 90 seconds of inactivity.
• Low power warning function to remind users to charge timely.
• Adopt ceramic sensor, highly accurate ±1psi.
• Rechargeable Lithium-ion battery. Long battery lifetime.USB Cable included.
- NT$0/PCS
-
Coming soon
NEW #FS60 - Handheld Digital Tire Inflator
• ABS housing+TPE, Comfortable, ergonomic molded pistol grip handle.
• Supplied with official calibration certificate
• Ideal for tyre fitters
• Auto-on when the pressure sensed, auto-off after 90 seconds of inactivity
• Low power warning function to remind users to charge timely.
• Rechargeable Lithium-ion battery. Long battery lifetime.USB Cable included.
• Accuracy Exceeds EC Directive 86/217- NT$0/PCS
-
Coming soon
#7886 - A/C Compressor Clutch Installer/Remover Kit
• Replaces clutches found on FS6, C171, 6P & 148 compressors GM R4 & A6, HR-6, DA-6 & V5 A/C compressors, Sanden compressors SD505, 507, 510, 575, 708 & 709
• 2 & 3 hole puller plate fits most clutches, mechanical force does the pulling
• Blow molded case for easy storage and transport
• Case Dimensions: (L)9″” x (W)8″” x (H)2″”
• Net Weight: 3lbs. (1.36kg)- NT$0/SET
-
Coming soon
#7822 - Harmonic Damper and Holding Puller Set
• Tool can be used to aid in the removal and installation of the crank bolt on most Chrysler, Hyundai and Mazda Engines
• Tool has a ½” square drive hole for use with a breaker bar or ratchet
• Tool aids in the removal of the harmonic damper pulleys even if pulley is hard to access and remove due to space limitations in and around the engine compartment
• In most cases this compact tool eliminates the need of a technician to go through the time consuming process of first removing the radiator before being able to remove the pulley
• Low profile puller is designed for use on the following automobiles, vans & pickups:
-Chrysler 1990 & later vans with 3.3L, V-6
-Chrysler 1993-1997 automobiles with 3.3L & 3.5L, V-6
-Chrysler 1994 & later vans with 3.8L, V-6
-Chrysler 1994 & later pickups with 8.0L, V-10
-Chrysler 1995 & later automobiles with 2.7L DOHC V-6, 3.2L SOHC V-6 & -3.5L SOHG V-6
-Chrysler 1998 and later automobiles with 4.7L V-8
-Mitsubishi Eclipse 1995-1999 2.0L DOHC Non-Turbo
-GM 1997 & later Gen III 5.7L V-8, including Camaro, Corvette, Firebird & Trans-Am
-2000 and later Gen III trucks & SUV’s with 4.8L V-8, 5.3L V-8, 6.0L V-8 & 8.1L V-8
-Cadillac 1998-1992 4.5L V-8, 1991-1995 4.9L V-8, Escalade 6.0L V-8
-Oldsmobile 1995 & later 4.0L V-8
-Mazda
-Japanese made vehicles- NT$0/SET
-
Coming soon
#7860 - 11pc. Disc Brake Pad & Caliper Service Tool Kit
• Magnetic socket adapter
• Includes 8 adapters for brake assemblies
• For rotating pistons back into caliper to provide clearance for new pads
• Prevents damage to the piston and boot
• Designed for use with Mercedes, BMW, Volkswagen, GM, Audi, Ford, Honda, Subaru, Mazda, Nissan, Mitsubishi, Toyota, Land Rover and 4- wheel drive vehicles
• Blow molded case for easy storage and transport
• Case Dimensions: (L)13-1/4″” x (W)10-1/4″” x (H)2″”
• Net Weight: 4-1/3lbs. (1.96kg)- NT$0/PCS
-
Coming soon
#NEW 7762 - Under Car Electrical System Locking Pliers Circuit Tester Light
- A simple test light with locking pliers ground clamp
- Lock onto grounds easier without them easily ripping off
- NT$0/PCS
-
Coming soon
#NEW 78834 - Last Chance” Impact Rated Hub Removal Bolt Kit
• For bolt-in or otherwise corroded hubs that should have come out with your 1st attempt but refuse to
• Simply use these impact rated ¾” (19mm) socket size M12 and M14 thread bolts and 15/16” (24mm) nuts to push against the knuckle assembly and force the hub out
• Use free hole locations existing in the hub or hammer out 1-2 wheel studs to install these press bolts (or 3 if ordering 2 sets)
• Custom press bolts feature a ball bearing end and work with included press feet to freely angle against uneven knuckles and dust shields• Includes 2 M14 press bolts and nuts, 2 M12 press bolts and nuts, and two press feet.
- NT$0/SETS
-
Coming soon
#235RASP - 2.5″ Buffing Wheel
- For use with tire buffer (235B – sold separately)
- Made of tungsten carbide
- NT$0/PCS
-
Coming soon
#7824 - Bearing Race And Seal Driver-Master Set
• Makes it easier to insert wheel bearing race and seals without damage to race and axle housing
• Set includes nine disc sizes to fit most standard wheel bearings
• Turn discs over to drive seals
• Set includes the following parts:
No. 1 – Size 1.565″
No. 2 – Size 1.750”
No. 3 – Size 1.965″
No. 4 – Size 2.325″
No. 5 – Size 2.470”
No. 6 – Size 2.555″
No. 7 – Size 2.830”
No. 8 – Size 2.995″
No. 9 – Size 3.180”- NT$0/PCS
-
Coming soon
#7846 - Harmonic Balancer Puller Set
• Designed for use on harmonic balancers, crankshaft pulleys, steering wheels and gear pulleys
• Can be used on tapped flywheels of electric or two-cycle motors
• Heavy duty 4-way slotted yoke
• 3 – Hardened forcing screws 3-3/4″” & 6-1/2″” long
• 11 sets of washer head bolts:
2 – 1/4″”-28 UNF x 3″”
3 – 5/16″”-18 UNC x 2″”
3 – 5/16″”-18 UNC x 4-1/2″”
2 – 5/16″”-24 UNF x 3-1/2″”
3 – 3/8″”-16 UNC x 4″”
3 – 3/8″”-24 UNF x 2″”
3 – 3/8″”-16 UNF x 2″”
3 – 8mm x 1.25 x 80mm
3 – 8mm x 1.25 x 40mm
2 – 8mm x 1.25 x 65mm
3 – 10mm x 1.50 x 50mm
- NT$0/PCS
-
Coming soon
#7856 - Universal Air Powered Cooling System Pressure Tester
- Pressure regulates shop air to test any cooling system or radiator cap for leaks
- Quick connector works on nearly all brands of cooling system testing caps and adapters
- Fills even large cooling system almost instantly, and provides constant pressure on leaks to trace their source
- Gauge displays the common pressures levels for different cooling systems and regulator will max at 30psi to prevent damage
- NT$0/PCS
-
Coming soon
#7874 - Pulley Puller And Installer Kit
• Removes pressed-on alternator and power steering pulleys on late model GM, Ford and Chrysler engines
• Installs late model GM alternator and power steering pulleys including Quad 4
• Blow molded case for easy storage and transport
• Case Dimensions: (L)9″” x(W)7-1/4″” x(H)2″”
• Net Weight: 2lbs. (.90kg)- NT$0/PCS