Undercar
-
Coming soon
#78515 - Adjustable Oil Filter Wrench
- Jaws are adjustable angle allowing use of the wrench pliers from multiple points of access
- Slip-joint handle offers a wide size range for use on 2-1/4″ to 4-3/4″ oil and fuel filters
- Indents every 30° for 180° of total adjustment
- Adjustment allows for anywhere from side access to bottom access on filters
- Precision cut teeth in a tried-and-true design for biting into metal filter housings
- NT$0/PCS
-
Coming soon
#FSOF30 - Oil Filter Wrench 30Pc
• Steel construction for strength
• 3/8"drive oil fi lter wrenches
• Complete program comprised of wrenches to fit most OEM and aftermarket oil fi lters
• Packaged to allow "test fi t" with actual filter to fi nd the correct size filter wrench- NT$0/SET
-
Coming soon
#FS965101001 - Alternator Bit Socket Set
• A comprehensive range of tools for removing alternators and free wheel pulleys on most vehicles.
• Set includes: M10 Spline x 1/2"D, T50 Star x 1/2"D for Bosch alternators, Hex 10mm | 8mm, Spline M8 |M10 and Star T40 | T50.Also included 1/2"D to Hex adaptor, 2 x pulley connectors and 2 further adaptors.
• Suitable for Audi | BMW | Fiat | Ford | Mercedes-Benz | Renault | Seat | Volkswagen.- NT$0/SET
-
Coming soon
#7898 - Deluxe Noid Lite And Gm Ac Signal Test Lights Set
• The most economic way to check electronic fuel injection (EFI) signals
• Quickly and easily checks for systems of GM TBI, Bosch PFI Ford TBI, GM PFI, Geo TBI and GM SCPI
• To test, just disconnect the fuel injectors, plug the Noid Lite into injector wiring harness then crank the engine
• Normal voltage is indicated by flashing light which is visible from passenger compartment
• Blow molded case for easy storage and transport- NT$0/SET
-
Coming soon
#7801 - 7Pc. Sensor & Sending Unit Socket Set
• 1″ & 1-1/16″ Oil Pressure Sending Unit Socket Includes a 1″ and 1-1/16″ hex which allows the removal of oil pressure sending units. Special deep design fits switches up to 2-5/8″. Designed to be used with a 3/8″ drive tool or 1-1/8″ wrench.
• 1-3/16″ Oil Pressure Sending Unit Socket. Allows the removal of oil pressure sending units on late 1980 and mid 1990 GM vehicles. Designed to be used with 1/2″ drive tool.
• 1-1/16″ GM Thermal Sensor Switch Socket. Allows the removal and installation of thermal sensor switch on 1973 – 1977 GM vehicles. Designed to be used with 1/2″ drive tool.
• 7/8″ Heated Oxygen Sensor Socket. Socket designed with slot in socket which accommodates the connectors on heat oxygen sensors. Socket has a double 1/2″ drive for easy access.
• 7/8″ Low Profile Offset Oxygen Sensor Socket. Low profile design for use in tight spaces. Designed to be used with 3/8″ drive tool.
• 7/8″ Oxygen Sensor Socket. Socket designed to remove and install oxygen sensors in most domestic and many imported vehicles. Socket designed with slot which allows clearance of wire. Designed to be used with a 3/8″ drive tool or 1″ wrench.
• 7/8″ Universal Vacuum PVS, TVS Valve and Oxygen Sensor Socket. Designed to remove and install vacuum switches with a 7/8″ hex and some oxygen sensors. Designed to be used with 3/8″ drive tool or with a 1″ wrench.
• Made of Cr-V- NT$0/SET
-
Coming soon
#78866 - 6 Point Axle Nut Socket Set 8 Pieces
- Includes seven 6-point axle nut sockets and one 12-point axle nut socket (39mm)
- Extra deep precision broached and forged from Cr-Mo with lasting finish
- 39mm size is 12-point design for 39mm applications which all have 12-point nuts (Toyota/Lexus)
- Lifetime Warranty, includes 1/2″ drive sizes in: 29, 30, 32, 34, 35, 36, 38 & 39mm
- NT$0/PCS
-
Coming soon
#9532 - Tungsten Carbide Gasket Scraper
- Precision ground tungsten carbide rectangular blade is nearly impervious to wear
- Perfect on flat surfaces for gaskets, rust, carbon build-up, weld slag, glue, paint and more
- 90 deg. blade edges require no maintenance or sharpening
The Tungsten Carbide Gasket Scraper is designed with a precision ground tungsten carbide rectangular blade that is nearly impervious to wear. This tool is perfect on flat surfaces for gaskets, rust, carbon build-up, weld slag, glue, paint and more. The 90 degree blade edges in this tool require no maintenance or sharpening.
- NT$0/PCS
-
Coming soon
#FS650B - Infrared Thermometer
- Temperature limit alarm indicator
- LCD Color Screen
- °C / °F Selection
- Ergonomically shaped hand grip
- NT$0/PCS
-
Coming soon
#78930 - 15Pc Master Disconnect Kit Plus 1/2" Ford Disconnect Tool
• A complete set of disconnect tools stored in a handy blow-molded case Fuel & Transmission Line Disconnect Set
• Anodized aluminum
• Separate fittings on fuel lines, fuel filters & fuel tank return lines
• Sizes: 1/4″, 5/16″, 3/8″ & 1/2″ Oil Cooler Line Disconnect Tool
• Separates automatic transmission oil cooler lines on Ford Taurus and Escort with AXOD and ATX transmissions
• Fuel line disconnect tool allows damage free fuel line quick connect coupler release
• Fits any 5/16″ or 3/8″ fuel line found on GM, Ford or Chrysler cars
• Ford fuel line coupling tool provides easy, damage-free fuel line separation
• Works on 1990 and newer Ford Ranger and Explorers with 4.0L, 6 cylinder engines
• Disconnect tool allows quick separation of quick connectors found on radiators, transmissions and power steering lines
• Releases the fingers on transmission-to-radiator oil cooler line easily without damage to the hose or connector
• Works on 1986 and newer Ford Taurus and Mercury Sable with an AXOD, AOD or ATX transmission
• Quick disconnect coupler tool slides down the line and into the connector; separating the clip apart without damaging the quick connect seals
• Works on late model Ford and GM vehicles
• This unit is used to disconnect transmission oil cooler lines
• Works on 2003 and 2004 Ford Explorer (V8), 2004 Ford F150, and 2004 Cadillac CS
• Unique design to clear the flare and disconnect the new style clips
Air Conditioning & Fuel Line Disconnect Tool Set
• Sizes 5/16″, 3/8″, 1/2″, 5/8″, 3/4″ and 7/8″ Air Conditioning & Fuel Line Disconnect Tool
• Allows easy disconnection of air conditioning lines & quick connect fuel lines
• Six distinctive tools allow the disconnecting of spring lock couplings air conditioning lines found on Ford and Chrysler
• Allows usage on fuel line quick connect couplings found on GM, Ford, and Chrysler
• 5/16″ Disconnect Tool allows usage on push lock connectors found on Ford radiators and transmission lines- NT$0/PCS
-
Coming soon
#94093 - Multi-Cable Hose Clamp Pliers
- Features 3 cables and 4 different jaw types and sizes for use on most automotive tension hose clamps
- Includes the standard jaws from Astro’s 9409A, extra large and small jaws, and Clic-R clamp jaws.
- Easily switch out cable and jaw designs for different applications
- NT$0/PCS
-
Coming soon
#9406 - 7Pc. Hose Clamp Pliers Assortment Kit
• Allows for extra reach, removal and locking of clamps into open position
• Allows for removal of plastic and/or metal self-tightening hose clamps with diameters of 11/16″ – 2-1/2″ (18mm-54mm)
• Precision clamp on end of flexible cable allows for extended reach where other models cannot reach
• Pliers can be locked, freeing up your hands and making your job easier and faster
• Rubber dipped handle
• Pliers have a lifetime warranty
• Cable and spring are wearable items and must be replaced.
US Patent # 6,370,985 B1
France Patent # 0012910
Swivel Jaw Hose Clamp Pliers (“+” Slot) (Astro Model # 9406B)
Swivel Jaw Hose Clamp Pliers (Astro Model # 9406C)
• Swivel jaws are slotted for positive holding of large or small clamps at any angle
• Ratchet action holds jaws closed in 5 different positions
• Fits all automotive and appliance spring wire hose clamps
• Allows fast and easy clamp removal
• Pliers latch in position to securely hold hose clamp when expanded
• Rubber dipped handle
Angled Flat Band Hose Clamp Pliers (Astro Model # 9406D)
• Designed to remove and install flat band hose clamps in hard to reach areas
• Pliers feature angled jaws with 360º rotating tips to grip clamps at any angle
• Locking latch securely holds clamp in position
• Rubber dipped handle
Hose Remover Pliers (Astro Model # 9406E)
• Designed to allow easy removal of 5/32″ to ½ vacuum and fuel hoses
• Rubber dipped handle
Clic-R Collar Pliers (Astro Model # 9406F)
• For releasing and re-fitting reusable hose clips
• For type Clic and Clic-R
Flat Band Hose Clamp Pliers (Astro Model # 9406G)
• Removes and Installs new style flat band hose clamps
• Rubber dipped handle- NT$0/PCS
-
Coming soon
#FSFS90318099 - Vacuum Type Cooling System Refill Kit
• Set for re lling new coolant by creating a vacuum in cooling system
• No need to undergo the time-consuming air bleeding after re lling new coolant
• Cone-shaped adapter o ers a wide application to di erent radiator ller necks
• Chain can be hooked underneath vehicle's hood- NT$0/SET
-
Coming soon
#FS064 - Water Tank Leak Detector Tool
• Test cooling system for leaks
• Includes hand pump, test head in a blow mold case- NT$0/PCS
-
Coming soon
#74494 - 4Pc Tire Spoon Lever
• 4PC SET: 300mm, 400mm, 500mm length with forged long lasting construction
• Specially designed tip engages with the bead so it can be easily removed
• A must have for any tire repair or service center- NT$0/SET
-
Coming soon
#9507 - Wheel Weight Balance Hammer Pliers
- 10 inch 7 -In-1 Design
- Hidden Spring Mechanism
- Made from Precision Forged CR-MO
- NT$0/PCS
-
Coming soon
#7460 - Tire Sealant Cement Cup And Brush
74601
brush-in-lid design, prevents evaporation and contamination
74602
cup capacity: 900c.c. / 0.9 liter / 0.95 qt
material: aluminum- NT$0/PCS
-
Coming soon
#FLW-0312 - Power Cross Lug Nut Wrench
• INCREASED LEVERAGE: Power Mode provides 2X the torque of a standard lug wrench
• QUICKER TIRE CHANGE: Speed Mode allows you to quickly remove lug nuts after breaking them loose-to get you back on the road
• COMPACT DESIGN: Easy storage
• UNIVERSAL FIT: Socket sizes will t SAE and Metric lug nuts that are standard
• On most passenger vehicles: 11/16" (17mm), 3/4" (19mm), 13/16" (21mm), and 7/8" (22mm)- NT$0/PCS
-
Coming soon
#FS301N - Digital Tire Inflator
• Digital pressure gauge (0-18 Bar/255psi)
• 500mm (20") durable rubber hose
• Solid brass body for corrosion resistance, more durability
• Accuracy: +/- 1% of full range, meet standard EEC/86/217
• Rubber bump guard to protect against drops and knocks
• Easy to read extra bright digital display- NT$0/PCS
-
Coming soon
#78803 - 4Pc. 1/2" Drive Thin Wall Flip Impact Socket Set With Protective Sleeve
• Made of industrial grade chrome molybdenum (chrome-moly) steel alloy
• Each impact socket comes with protective sleeve
• To effectively use 19mm Socket you must use included 3″ Extension Bar- NT$0/SET
-
Coming soon
#7870 - 7Pc. Impact Socket Set - Chrome Protective Plastic Sleeves And Shallow Broach
• This socket set features protective sleeves and internal plastic inserts that prevent scratching of wheels and decorative lug nuts
• Hollow design creates room for removing longer bolts by pushing out plastic insert
• Sizes Include: 13/16″, 7/8″, 1″, 1-1/16″, 17mm,19mm, 21mm
• 1/2″ Drive
• Blow molded case for easy storage and transport
• Case Dimensions: (L)10-1/4″ x (W)6-1/4″ x (H)1-3/4″
• Net Weight: 5lbs. (2.26kg)
Click Here to Download: Parts Breakdown
- NT$0/SET