Hand Tools
-
Coming soon
#FSSRP6 - 6pc Snap Ring Plier Set
- Includes three of the most popular tip sizes in straight and 90° angle configurations
- Remove and install both internal and external snap rings on a wide range of applications
- Includes lengths: 5-5/8", 5-3/4", 6", 7-1/2", 7-7/8"
- Includes tip sizes: .038", .047" and .070"
- Comfortable Plastisol-dipped handles
- NT$0/SETS
-
Coming soon
#UIDS6 - 6pc Universal Impact Driver Socket Extension Set
- Access and quickly remove and install difficult to reach or confined fasteners with your impact driver
- Pinless universal socket extensions provide 360 degrees of articulation with a more direct transfer of impact power
- Satin chrome 1/4" hex shank design for use with any impact driver
- 6" long pinless universal impact driver 12-point socket extensions in sizes: 7mm, 8mm, 10mm, 12mm, 13mm and 14mm
- NT$0/SETS
-
Coming soon
#UIDTS6 - 6pc Universal Impact Driver Triple Square Extension Set
- Access and quickly remove or install difficult to reach or confined Triple Square fasteners
- Pinless universal design provides 360 degrees of articulation with a more direct transfer of impact power
- Satin chrome 1/4" hex shank design for use with any impact driver
- Made from ultra-durable hardened S2 Tool Steel and CRO-MO
- 6" long pinless universal impact driver extensions in Triple Square sizes: M4, M5, M6, M8, M9, M10
- NT$0/SETS
-
Coming soon
#UIDMH7 - 7pc Universal Impact Driver Metric Hex Extension Set
- Pinless universal design provides 360 degrees of articulation with a more direct transfer of impact power
- Satin chrome 1/4" hex shank design for use with any impact driver
- Made from ultra-durable hardened S2 Tool Steel and CRO-MO
- 6" long pinless universal impact driver extensions in Metric Hex sizes: 2.5mm, 3mm, 4mm, 5mm, 6mm, 7mm & 8mm
- NT$0/SETS
-
Coming soon
#UIDT7 - 7Pc Universal Impact Driver Torx Extension Set
- Access and quickly remove or install difficult to reach or confined TORX fasteners
- Pinless universal design provides 360 degrees of articulation with a more direct transfer of impact power
- Satin chrome 1/4" hex shank design for use with any impact driver
- Made from ultra-durable hardened S2 Tool Steel and CRO-MO
- 6" long pinless universal impact driver extensions in TORX® sizes: T20, T25, T27, T30, T40, T45 and T50
- Set comes in a blow-molded case
- NT$0/SETS
-
Coming soon
#FS250F - 1/2" Torque Wrench Split Beam
• Split-beam design eliminates the need to reset torque value back to zero when not in use, stays accurate while stored at your last torque level.
• 15° flex head, 40-250 ft.lbs. range, accuracy meets or exceeds ASME B107.14M ±4% CW.
• Adjusts to your value quicker than traditional torque wrenches by using a thumb screw adjustment with rotating dial face gauge window.
• Rugged design featuring handle that is chemical proof nylon, has less moving parts with no coil spring for reduced wear and tear, and stays within calibration when left at any torque setting for repeated accurate use.
• Locking guard cover with serrated teeth to hold adjustment screw in place to avoid unintentional changes.
• 32-tooth ratchet head, audible click and/or impulse when torque setting is reached.
• For measuring torque in a clockwise direction only, split-beam torque wrenches are not reversible.
- NT$0/PCS
-
Coming soon
#68628 - 3/4” Push Through Split Beam Torque Wrench
• 3/4" with detachable fixed ratchet applied to both clockwise and counterclockwise
• Tolerance of torque ±4%.
• Loud click sound strong impulse when required torque is reached.
• Quality meets DIN ISO 6789 & ASME B107.300-2010- NT$0/PCS
-
Coming soon
#68867 - 1" Breakback Torque Wrench
- Unique linking plate and support plate design gives very clear "Torque break point”,
- which reduces the possibility of over-torquing, even in arduous working conditions.
- Push-through ratchet allows two direction tightening.
- Quality meets DIN ISO 6789 & ASME B107.300.2010
- NT$0/PCS
-
Coming soon
#FS8693 - 1" Torque Wrench
Torque range 300~1500 N.M
• Industrial application.
• Wide range of choice.
• Tolerance of torque ±3%.
• Easy torque-adjusting design.
• Quick release design.
• Applied to both clockwise and counterclockwise directions.
• Quality meets DIN ISO 6789 & ASME B107.300-2010.- NT$0/PCS
-
Coming soon
#BST19 - 19PC HSS Turbo-Step Drill Bit Set
- Turbo-Step drill bit tip design cuts 45% faster and excels at sheet metal and hardened metals like broken fasteners
- Stays sharp up to 4X longer compared to conventional and other specialty tip designs
- The multi-stepped tip acts like a step drill, allowing for laser like holes through sheet metal and prevents walking on curved surfaces
- Size: 1, 1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6, 6.5, 7, 7.5, 8, 8.5, 9, 9.5, 10mm
- NT$0/SETS
-
Coming soon
#BST25 - 25PC HSS Turbo-Step Drill Bit Set
- Turbo-Step drill bit tip design cuts 45% faster and excels at sheet metal and hardened metals like broken fasteners
- Stays sharp up to 4X longer compared to conventional and other specialty tip designs
- The multi-stepped tip acts like a step drill, allowing for laser like holes through sheet metal and prevents walking on curved surfaces
- Size: 1, 1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6, 6.5, 7, 7.5, 8, 8.5, 9, 9.5, 10, 10.5, 11, 11.5, 12, 12.5, 13mm
- NT$0/SETS
-
Coming soon
#FSDBC21 - 21PC Cobalt Turbo-Step Drill Bit Set
- Cobalt Turbo-Step Drill Bit Set uses the strongest material for you to drill through the toughest jobs like stainless, grade 8 fasteners, hardened alloys and cast irons
- Mechanic’s length size for increased drill bit rigidity and improved tight space access which cuts 45% faster and stay sharp 4X longer than traditional bits
- Each drill bit acts like a step drill, spreading the job of cutting across multiple levels, keeping the drill bit cool, the wear down and eliminating the need for pilot holes
- Includes three-flatted shanks to reduce slippage common with keyless chucks
- Contains 1/16" through 3/8" by 64ths cobalt mechanic's length Hyper-Step drill bits
- NT$0/SETS
-
Coming soon
#BST29HRS - 29PC Turbo-Step Reduced Shank Drill Bit Set
- Turbo-Step tip design cuts 45% faster and excels at sheet metal and hardened metals like broken fasteners
- Stays sharp up to 4X longer compared to conventional and other specialty tip designs
- The multi-stepped tip acts like a step drill, allowing for laser like holes through sheet metal and prevents walking on curved surfaces
- Three-flatted shanks on both sizes below 3/8" and on the 3/8" reduced shank sizes up to 1/2"
- Eliminates the need to drill starter pilot holes before making larger hole sizes
- Contains 1/16" through 1/2" by 64ths hyper-step drill bits
- NT$0/SETS
-
Coming soon
#FSDBC29 - 29PC Cobalt Turbo-Step Reduced Shank Drill Bit Set
- Cobalt Turbo-Step Drill Bit Set uses the strongest material for you to drill through the toughest jobs like stainless, grade 8 fasteners, hardened alloys and cast irons
- Mechanic’s length size for increased drill bit rigidity and improved tight space access which cuts 45% faster and stay sharp 4X longer than traditional bits
- Each drill bit acts like a step drill, spreading the job of cutting across multiple levels, keeping the drill bit cool, the wear down and eliminating the need for pilot holes
- Three-flatted shanks on both sizes below 3/8" and on the 3/8" reduced shank sizes up to 1/2"
- Contains 1/16" through 1/2" by 64ths cobalt mechanic’s length Hyper-Step drill bits
- NT$0/SETS
-
Coming soon
#BST4L - 4PC Large Turbo-Step Drill Bit Set
- 1/2" reduced shank for use in 1/2" capacity cordless tools
- Turbo-Step design in large sizes eliminates the need for up to two pilot holes that traditional drill bits require
- Cuts 2X faster than traditional Silver and Deming drill bits
- Matco’s patented Hyper-Step design in sizes above 1/2"
- Includes sizes 17/32", 9/16", 19/32" and 5/8" with flats and 1/2" reduced shanks for everything from drilling out truck bed bolts and high alloy steel to sheet metal
- NT$0/SETS
-
Coming soon
#CDB13 - 13PC Cobalt Drill Bit Set
- 13 cobalt drill bits 1/16" through 1/4" in 64ths
- Made from M42 8% cobalt with superior hardness for the highest possible heat and wear resistance
- Suitable for the toughest high alloy steels, stainless and fasteners
- 135° split point design for easier hole starting, faster cutting and longer edge life
- 3-flats ground on shank for a more positive grip using cordless keyless chucks
- NT$0/SETS
-
Coming soon
#CDB21 - 21PC Cobalt Drill Bit Set
- Made from M42 8% cobalt with superior hardness for the highest possible heat and wear resistance
- Suitable for the toughest high alloy steels, stainless and fasteners
- 135° split point design for easier hole starting, faster cutting and longer edge life
- 3-flats ground on shank for a more positive grip using cordless keyless chucks
- Includes 21 cobalt drill bits in sizes 1/16" through 3/8" in 64ths
- NT$0/SETS
-
Coming soon
#CDB29 - 29PC Cobalt Drill Bit Set
- Made from M42 8% cobalt with superior hardness for the highest possible heat and wear resistance
- Suitable for the toughest high alloy steels, stainless and fasteners
- 135° split point design for easier hole starting, faster cutting and longer edge life
- 3-flats ground on shank for a more positive grip using cordless keyless chucks
- Includes 29 cobalt drill bits in sizes 1/16" through 1/2" in 64ths
- NT$0/SETS
-
Coming soon
#M229 - 29PC High Speed Steel Drill Bit Set
- 29 M2 high speed steel drill bits 1/16" through 1/2" in 64ths
- Sizes above 3/8" have 3/8" reduced shanks for 3/8" capacity and up drills; sizes below have 3 flats for a positive grip using keyless chucks
- 135° split point design for easier hole starting, faster cutting and longer edge life
- NT$0/SETS