Paint & Body
-
Coming soon
#WINDK-08L - 35mm Serrated Straight Blade for WINDK
• 35mm Round Nose Serrated Blade for WINDK-Windshield Remover• Material:SUS420J2
• Hardness of the blades:HRC48~51
• Flexibility of the blades: 202 mm²
- NT$0/PCS
-
Coming soon
#WINDK-08C - 60mm Hook Blade for WINDKO
- 60mm (2.37-Inch) Hook Blade for WINDK – Windshield Remover
- Material,SUS420J2
- Hardness of the blades,HRC48~51
- Flexibility of the blades, 202-Square Millimeter
- NT$0/PCS
-
Coming soon
#WINDK-08B - 36mm Hook Blade for WINDKO
- 36mm (1.42-Inch) Hook Blade for WINDK – Windshield Remover
- Material,SUS420J2
- Hardness of the blades,HRC48~51
- Flexibility of the blades, 202-Square Millimeter
- NT$0/PCS
-
Coming soon
#WINDK-08A - 24mm Hook Blade for WINDKO
- 24mm (.95-Inch) Hook Blade for WINDK – Windshield Remover
- Material,SUS420J2
- Hardness of the blades,HRC48~51
- Flexibility of the blades, 202-Square Millimeter
- NT$0/PCS
-
Coming soon
#WINDK-08I - 48mm Scraper Blade for WINDKO
- 48mm Scraper Blade for WINDK – Windshield Remover
- Material,SUS420J2
- Hardness of the blades,HRC48~51
- Flexibility of the blades, 202-Square Millimeter
- NT$0/PCS
-
Coming soon
#1770 - Deluxe Air Windshield Remover
• Tool is counter balanced for smooth operation which results in less fatigue to the body
• Heavier and thicker blades last much longer
• Built-in air regulator
• 12000 strokes per minute allows you to cut through urethane much faster
• Comes with 4", 6"and 8" blades
• No lubricants needed
• No clean up time necessary
• Safety lever
• Replacement blades available:
17704 - 4" Serrated Blade
17705 - 6" Serrated Blade
17706 - 8" Serrated Blade
Click Here to Download: Parts Breakdown- NT$0/SET
-
Coming soon
#17704 - 4" Serrated Blade For Use With 1770 Deluxe Air Windshield Remover
• 4" Serrated Blade- NT$0/PCS
-
Coming soon
#17705 - 6" Serrated Blade For Use With 1770 Deluxe Air Windshield Remover
• 6" Serrated Blade- NT$0/PCS
-
Coming soon
#17706 - 8" Serrated Blade For Use With 1770 Deluxe Air Windshield Remover
• 8" Serrated Blade- NT$0/PCS
-
Coming soon
#1756 - Air Spot Drill with 5.5″ Deep Clamp Kit and 5 Drill Bits
• 2 Speed
• Free Speed 1,600rpm
• Adjustable depth stop which allows you to drill out just the spot weld and not the panel beneath
• Drills out the entire spot weld, eliminating the need for grinding
• Lower speed decreases heat and extends drill bit life
• Kit Includes:
1 – Air Spot Weld Drill with 3 x 8mm plus 2 x 6.5mm
1 – 5.5″ Deep Clamp
5- Drill Bits 2pcs. 6.5mm (#1720) and 3pcs 8mm (#1721)
1 – In Line Oiler (#3000)
1 – 3 Way Swivel (#3SB10)
1 – Plastic Blow Molded Case
Click Here to Download: Parts Breakdown- NT$0/PCS
-
Coming soon
#1757 - Air Spot Drill -500 rpm with 5.5″ Deep Clamp Kit and 5 Drill Bits
• 2 Speed
• Adjustable depth stop which allows you to drill out just the spot weld and not the panel beneath
• Drills out the entire spot weld, eliminating the need for grinding
• Kit includes:
1 – Air Spot Weld Drill
1 – 5.5″ Deep Clamp
5 – Drill Bits((3pc 8mm, 2pc-6.5mm)
1 – End Line Oiler (3000)v
1 – 3 Way Swivel (3SB10)
1 – Plastic Blow Molded Case
Click Here to Download: Parts Breakdown- NT$0/PCS
-
Coming soon
#7600 - Hot Staple Gun Kit for Plastic Repair
• Hot Staple Gun designed for quick repair and reinforcing broken/ripped/damaged/split plastic on autos motorcycles ATVs boats etc.‧ Produces a strong durable repair while still leaving plastic flexible enough for correct fit
• Unique Staple Gun heats special designed staples and sets staples into plastic
• Repairs plastic components such as bumpers headlight fittings and assemblies panel clips tabs plastic pins spoilers etc.
• Easy to use saves time and money
• Wattage: 27W +/- 2W
• Kit includes: Hot Staple Gun Wire Cutter Flip Screwdriver 50pc each of “M” “S” “V” and “Z” Style Staples- NT$0/SET
-
Coming soon
#7600M - 50pc “M” Style Staple for Use with #7600 For Repairing Outside Corners
• Made of Stainless Steel (S.S.304) ‧ Width: ?” (.500”) ‧ Thickness: 1/32” (.030”) ‧ Pack of 50pc- NT$0/Bag
-
Coming soon
#7600V - 50pc "V" Style Staples for Use with #7600 for Repairing Inside Plastic Corners
• Made of Stainless Steel (S.S.304)‧ Width: ?” (.500”)‧ Thickness: 1/32” (.030”)
• 50pc pack- NT$0/Bag
-
Coming soon
#7600Z - 50pc "Z" Style Staples for use with #7600 for Repairing Flat Plastic Areas
• Made of Stainless Steel (S.S.304)‧ Width: 1/2" (0.500)
• Thickness: 1/32" (0.030)‧ 50pc pack- NT$0/Bag
-
Coming soon
#7600S - 50pc "S" Style Staples for Use with #7600 for Repairing Flat Plastic Areas
• Made of Stainless Steel (S.S.304)
• Width: ½” (.500”)
• Thickness: 1/32″” (.030”)
• 50pc pack- NT$0/Bag
-
Coming soon
#FSPA227 - Cordless Soldering Iron Kit
• Cordless and lightweight with durable anti-slip rubber grips on the handle
• Rapid start: Industry-leading 8 seconds from cold to soldering temperature with the press of a button, up to 1,100°F.
• Mobile: No cords or butane exhaust to worry about and three quickly interchangeable heads including point tip, chisel tip, and heat shrink coil.
• Works longer: Twice the run time as the competition, 40 minutes of continuous soldering with LED work light.- NT$0/SET
-
Coming soon
#FSPA228 - Cordless Plastic Welding And Hot Stapler Kit
• Staples and more. Rechargeable tool sets staples and also performs plastic welding and plastic filler to repair bumpers, panels, brackets, headlights, and more.
• All inclusive. Three interchangeable heads for hot staples, plastic welding and filler with charging cord, 100 staples, wire mesh, and filler rods in PE, PP, PP flat, PS, and ABS materials.
• Performance. Allows you to set up to 200 hot staples in 3 seconds or less, or a 30 to 40 minutes welding runtime on a single charge.
- NT$0/SET
-
Coming soon
#FS399 - Swivel Head Soldering Iron Kit
• Index head for 3 di erent angles and can be operated in each angle while working, angles for di erent applications
• All-in-one ignition switch with single-handed igniter operation
• Magnetic stand allows for vertical storage on side of toolbox
• Fuel gauge window on the bottom of the tool (Users friendly)- NT$0/SET
-
Coming soon
#FSJT - Jumbo Torch
- Jumbo wind proof flame adjusts from 3-1/2" to 6"
- High BTU output for rapid welding, soldering, brazing or general auto or electrical repair
- 30mL butane tank volume, 1.5 hours burn time
- NT$0/PCS